Roland V-1HD+ Compact 4 x HDMI Video Switcher

The integrated T-fader allows you to manually control the speed of transitions, or you can use the take button to actuate your selected transition. The unit features two HDMI outputs, selectable between program and multiview (up to 10 views on each output), and output #2 also supports an on-screen menu display. The V-1HD+ also features a four-layer effects engine that supports keying effects, PiP, and downstream keys. It has internal memory for four still images, and you can access external drives via the USB port as an additional image source.

General

The V-1HD+ features PGM and PST busses and a transition/fade bar (T-bar), which are industry-standard video switching controls. Tactile audio volume knobs, signal/peak lights, and unity gain markers enable intuitive sound level adjustments on the fly.

HD Switcher

This compact HD switcher has four HDMI inputs, supporting HD video and PC resolutions. Each input incorporates a frame buffer/TBC that allows you to use non-genlocked cameras and play-out devices as video sources. Select the broadcast system (59.94/50 Hz) within the menu.

Audio Mixer

The built-in 14-channel audio mixer allows you to de-embed audio from the HDMI stream, mix, and re-embed the audio into your output stream. In addition to the embedded audio, the V-1HD+ supports analog audio input via two 3-pin XLRs, a left/right pair of RCA connectors, and a 3.5mm stereo mic input.

Audio

Each audio input has its three-band equalizer, high-pass filter, compressor, noise gate, and a sync delay to align audio with video if needed. The XLR and 3.5mm inputs include de-essers to clean up vocal sounds in real-time. The built-in limiter, three-band equalizer, and compressor on the main outputs enable you to deliver broadcast-quality sound over the analog audio outputs.

Live Stream

You can record or live stream the output of the mixer by connecting to a computer.

Control Buttons

The soft-rubber backlit buttons allow you to easily see the condition of your switcher, even in dim lighting conditions. The V-1HD+ features the standard source, preview, mix, cut, auto buttons, fader bar, fade in/out the knob, and four physical memory buttons that allow you to choose up to eight quick presets for stills and effects sources.

Recording

The unit has a record control button to start and stop recording to select Atomos recorders via HDMI.

Four-Layer Effects Engine

The V-1HD+ supports up to four composition layers, making adding lower-third titles, logos, social media comments and more straightforward for a polished professional output that will keep your audience’s attention.

Keying

The keying functionality permits picture-in-picture, green screen, and graphics keying.

Video Effects

Transition: Cut, mix (dissolve/FAM/NAM), Wipe (8 types)

Composition: PiP (square, circle, diamond), split (2 types), keyer (luminance, chroma), DSK (luminance, chroma)

Other: Flip horizontal, flip vertical, still image capture, still image playback, output fade (audio, video: white or black), test pattern output

Memory

The memory button allows you to save or recall up to eight presets, and the Freeze button can temporarily pause the incoming video.

Panel Buttons

These buttons can be used to switch your video instantly or to apply effects.

Transitions

The T-bar lets you control the speed of your selected transitions.

Still Image

The switcher can store up to four files in its internal memory and supports the following still image formats:

Bitmap file (.bmp): Maximum 1920 x 1080 pixels, 24-bit color, uncompressed

PNG file (.png): Maximum 1920 x 1080 pixels, 24-bit color (PNG alpha channel not supported

Audio Effects

Delay

High-pass filter

De-Esser

Compressor

Noise gate

Equalizer

Limiter

Reverb

Test tone output

HD Video Mixer Ready for Streaming

- Allows live broadcasts in Full HD with simultaneous streaming via USB-C to any known web platform

- Eight 3G SDI inputs with frame rate conversion

- Eight 1080p HDMI inputs with frame rate conversion, including four inputs with real-time scalers

- Seven outputs in total (SDI, HDMI, and USB-C streaming)

- Seven selectable output modes: Program, Sub-Program, Aux, Preview + three multi-view display options

- 40-channel digital audio mixer with effects and signal processing

- Eight-layer video effects engine

- 16 still image storage slots for screen capture or uploading BMP, JPEG, and PNG image files via alpha channel to non-volatile internal memory

- Live automation with sequencing, macros, and stored presets

- PTZ control supports multiple brands and simultaneous control protocols

- Advanced device control via Bluetooth, USB, RS-232, and LAN

- Camera tally light: wireless or wired

- Remote control software available for iPad, macOS, and Windows

Included in Delivery:

- 1x power adapter

- 1x power supply

- 2x rack mounting brackets

- 6x rack mounting screws

Technical Data:

Video:

- Video processing: 4:2:2 (Y/Pb/Pr), 8 bits

- Inputs: 8x HDMI / 8x 3G-SDI

- Outputs: 3x HDMI / 3x 3G-SDI / USB-C (for streaming)

- Preview: 1x HDMI

- HDCP: supported

- Multi-format: supported for HDMI inputs 5 to 8

- Maximum supported resolution: 1080p

- Maximum supported frame rate: 60 fps

Audio:

- Sampling frequency: 24 bits, 48 kHz

- Inputs: 2x combo XLR / 6.3 mm jack / 2x 6.3 mm jack / 2x RCA

- Outputs: 2x XLR / 2x RCA

- Audio format: Linear PCM

- Input level: -60 to +4 dBu (audio input 1-2) / -10 dBu (audio input 3-4)

- Input impedance: 9.4 kOhm (audio input 1-2) / 47 kOhm (audio input 3-4)

- Output level: +4 dBu (XLR) / -10 dBu (RCA)

- Output impedance: 600 Ohm (XLR) / 1 kOhm (RCA) / 10 Ohm (Headphones)

General:

- USB storage: USB A (for USB stick)

- USB stream: USB C (for remote control from PC and iPad)

- Tally/GPIO: DB-25

- RS-232: DB-9

- LAN control: RJ45 100Base-TX (for remote control)

- Bluetooth: Version 4.2

- Supported Bluetooth profiles: A2DP (audio), GATT (MIDI via Bluetooth Low Energy)

- Bluetooth codec: SBC (supports SCMS-T content protection)

- Display: 4.3" TFT color LCD, 480 x 272 px

- Power supply: Power adapter

- Power consumption: 2.5 A

- Power consumption: 55 Watt

- Dimensions (LxWxH): 437 x 253 x 103 mm

- Weight: 3.9 kg